Obsah
MCU
Zoznam súčiastok a modulov, vývojárskych prostriedkov a pomôcok
Projekty
Freezer - hromadný odpaľovač na fotoaparáty
Camera Motion Capture
Procesory
Moduly
- MPU-6050 6-axis gyro Triple Axis Accelerometer & Gyro Breakout MPU-6050 (ER-SPS06050S)
- MPU-9250 9-axis gyro IMU 9DOF MPU-9250 (ER-SM9250MPU) 9-axis MotionTracking device
- Adafruit 2021 9-axis gyro Adafruit 9-DOF Accel/Mag/Gyro+Temp Breakout Board - LSM9DS0
- Adafruit 1604 10-axis gyro Adafruit 10-DOF IMU Breakout - L3GD20 + LSM303 + BMP180
- SparkFan SEN-13339 6-axis gyro 6 Degrees of Freedom Breakout LSM6DS3 (SparkFun SEN-13339)
- SparkFan SEN-12636 9-axis gyro LSM9DS0 IMU Breakout - 9DoF (Sparkfun SEN-12636)
- Flight control 10-axis gyro IMU 10DOF MPU6050+HMC5883L+BMP085 (ER-SMO8810DOF) flight control sensor module
Súčiastky
- 5mW Red Light Module T Focus Stripe Lens Industrial Laser Head
- Output: red laser straightly(650nm)
- Size: approx. Φ12 x 35mm
- Cable lenth: about 135mm
- Working voltage: 3-5V
- Current: 40mA (Max)
- 5PCS Micro USB 5V 1A 18650 Lithium Battery Charger Board With Protection Module
- Charge module- Linear charging.
- Current- 1A adjustable.
- Charge precision- 1.5%.
- Input voltage- 4.5V-5.5V.
- Full charge voltage- 4.2V.
- Led indicator- red is charging Green is full charged.
- Input interface- micro USB.
- Work temperature- -10℃ to +85℃.
- Inversed polarity- NO.
- Size- small to 25X19X10mm.
- Ampere meter can only be connected to 5v input end of the module.
- It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
- The connection wire should not be too thick.
- Make sure the connect point is good.
- If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-substract the charging current to avoid burn damage to chip.
- NO Reveral polarity.