LED Matrix 8x8

Návod na montáž a na pripojenie. Použitý je chip 74HC595, čiže napríklad aj MAX7219. Cenová ponuka napríklad tu.

• CLK: Serial-Clock Input. 10MHz maximum rate.
• CS: Chip-Select Input. Serial data is loaded into the shift register while CS is low.
• DIN: Serial-Data Input.
• DOUT: Serial-Data Output. The data into DIN is valid at DOUT 16.5 clock cycles later.
• VCC: Positive Supply Voltage. Connect to +5V.
• GND: Ground

• CLK - CLK
• CS - CS
• DIN - DOUT
• GND - GND
• VCC - VCC

• Blue Wire - CLK
• Purpule Wire - CS
• Grey Wire - DIN
• White Wire - GND
• Black Wire - VCC

Podklady Instructables a ukážkový program na STM8.